Forum
WARNING:This product contains nicotine. Nicotine is an addictive chemical.
Launch Time: 2017-01-17 Views: 2080 Rely: 0 Started by:
The Joyetech eVic Primo comes with upgradeable firmware, as well as multiple fashionable features including the real-time clock, custom logo and preheat. With the help of the RC (reverse charging) adapter, you can even use it as a power bank to charge your electronic products. Powered by dual replaceable 18650 cells, the eVic Primo provides durability and reliability with #200W maximum output. Featuring the new equalizing charge system, it supports 1.5A quickcharge capability.
On its own, the eVic Primo mod weighs 156g and measures 53mm in length and 26mm in width. The height of the entire with kit with tank comes in at 134mm. The mod is available in silver, bronze, black with silver, black with red and black with grey. The device looks to be made from zinc alloy with a leather-like battery cover. The atomizer bezel at the top has a diameter of 25mm, so you can install large builds/tanks without any overhang.
The eVic Primo also comes with upgradeable firmware, as well as multiple fashionable features including the real-time clock, custom logo and preheat. With the help of the RC (reverse charging) adapter, you can even use it as a power bank to charge your electronic products. Featuring the new equalizing charge system, it supports 1.5A quickcharge capability. The UNIMAX 25 atomizer adopts the exclusive TFTA system where airflow control and e-liquid filling can be easily achieved by rotating or removing the top cap.
To be able to put out 200 watts of power for extended periods, the unit utilizes dual 18650 batteries that can be removed for external charging. The device is also built with an on-board USB charging setup to top off the cells while they are installed inside the mod. Charging occurs at a fast 1.5A and uses new balanced charging technology to make sure levels of each battery are equal. The USB port can be found on the bottom of the control face and is also used for future firmware upgrades to keep up with any future vape technologies.
The eVic Primo box mod uses the latest firmware from Joyetech which allows the large OLED, which features an easy/effective menu, to display a real time clock, a custom logo and reverse charging. The latter allows the mod to be used as a power bank in case your phone or tablet needs an emergency charge. With the help of the RC (reverse charging) adapter, you can even use it as a power bank to charge your electronic products. Powered by dual replaceable 18650 cells, the eVic Primo provides durability and reliability with #200W maximum output.
Firmware 4.05 also allows for the Primo to be used in a wide range of modes: variable wattage, variable temperature with nickel, titanium or stainless steel, TCR mode for custom resistance settings, smart mode, RTC (real time clock) mode and USB charge mode. The maximum output comes in at 200 watts, the lowest resistance is just 0.05ohm and temperature operation is possible in the range of 200 to 600 degrees Fahrenheit. Moreover, the box mod uses a new buck-boost technology to provide steady output and preheat ramp firing for faster initial coil engagement.
The Unimax 25 tank has a 5 ml e-juice capacity and is refilled from the top by removing the top cap. For better flavors and to prevent leaks, airflow is also changed by rotating the top cap. The tank is said to work well for those who enjoy mouth to lung or direct to lung vaping. If you would like to use this tank with a tube battery system, check out this Unimax 25 Kit.
