New Release: SkyStar Revvo Kit

The exact meaning of the name Revvo, no one really knows, but we do know that it is often strong personalities who have this name---energetic, charismatic, ambitious and focused. And so is this SkyStar Revvo Kit designed and manufactured by Aspire. The SkyStar Revvo Kit is composed of a dual 18650, 210 Watt Revvo Mod with a 1.3 inch touch screen and the revolutionary Revvo Tank.

The Revvo Mod adopts a rounded, gentle structure, amiable yet determined. It's polished surface presents focused delicacy and radiates reserved strength, bespeaking a tender yet steadfast resolution of being supremely excellent.

Its 1.3 inch OLED touch screen promises effortless streamline operating experience. While the Mod is on, swipe the screen down twice to enter menu interface, where you can adjust the settings to your liking. Five sub-categories are available in the menu, including Mode, Data, System, Time, and About. When the Mod is on standby, a standard watch interface appears on the screen, serving the office of time-telling in case your phone is powered off or out of reach. The fire button is seamlessly integrated into the display, being of the same material and color, and installed right on top of the screen. The Micro USB Port is quite a con in that the plug hole damaged the integrity and wholeness of the display which would have been perfect if it is elsewhere and had there not been the diving line which separates the fire button from the display. The battery cover endorses the same curves and lines as the structure in a whole, though the slits quite spoiled the unity and cohesion of the body.

The Revvo Tank reformed the landscape of RTA forever. Instead of adopting the classic post and coil structure, the Revvo Tank presents the flat Radial Coil design---the first attempt in the industry. The ARC, "Aspire Radial Coil", wired in parallel circles, is fixed horizontally in one part of the coil head, whereas cotton is stuffed in the other part. Upon being screwed and set together, the two parts of the coil head forms an astoundingly large surface area, which helps bring forth greater vapor production at either 0.10 ohm or 0.16 ohm using the Kanthal AF Wire. Suggested wattage for the Revvo Tank is 50--100 W, and at 80--85 W the coil functions at optimal.

In the adjustable top airflow system, three large air inlets enable consistent and smooth air inflows and ensure unrestricted mixture of air and vapor to bring forth a wide range of flavor depths and tones. Instead of the classic top-filling structure which most Tanks adopt, the Revvo Tank is filled through the center, where a spring is installed, being soft enough to receive glass droppers, and being strong enough to resist leakage.

With clear instructions marked inside the Mod chamber, battery installation is almost foolproof. Turn off the Mod during battery installation. Open the back panel by inserting a sharp point (e.g., your fingernail) into the slot at the bottom and pull out the battery cover.

The Revvo Kit features automatic cutoff, over discharge protection, overcharge protection, overheat protection, short circuit protection, and reverse-polarity protection. It is charged via a micro-USB port. When charging 2 flashing battery icons are displayed on the screen, presenting all important stats like voltage, charging current and charging time. The USB port is also used to update firmware.

Specifications:

Mod parameter

Output Power: 1-210W

Mod Type: Box Mod

Temperature Mod: Yes

VV/VW Mod: Yes

USB Cable: Yes

USB Charger: No

Bypass Mode: Yes

Built-in Battery: No

Atomizer Parameter

Atomizer Capacity: 3.6ml

Atomizer Diameter: 24mm

Atomizer Height: 45mm

Tube Materials: Pyrex Glass

Coil Changeable: Yes

Connection Thread: 510

Filling Method: Top Fillin

Packing List:  

1x Aspire SkyStar MOD

1x Revvo Tank - 3.6ml

1x ARC Coil(Pre-installed)

1x Extra ARC Coil

1x Replacement Glass Tube

1x Protective Silicone Cap

10x O Rings

1x USB Cable

1x User Manual

Tags: SkyStar Revvo Kit